Pages

Monday, May 21, 2018

Dimension, Gravity, Force, Time, and dilation

This post will bring all of the things we have been discussing over the past 30 or 60 days together and will definitively cement AuT as a unifying theory of the universe in 3 drawings, one of which you've seen before with some slight modifications.

As a precaution, I have updated book 3 to the 4th edition although some additional edits will be required as this information permeates the still rough 4th edition.  This month?  Probably not, but next month and all the important things, how oft have I said that, will be there.

This, however, is important.

I'm including an article.  The irony of this article is that conservative science shows the same prejudices,  alas, towards me.  Ahhh Kate, if only you could see that even your precious scientific community is fickle.
Physicist Kate Shaw: ‘Even in conservative places, you do not have to be in conflict with scientific ideas’ http://flip.it/jU8b3o

Anyway, cnough about the nonsense of Kate's reality and on to everyone's reality:

The three diagrams below will be used to explain the interface between Dimension (the first thing), Gravity (the second thing and the first force), the the other forces giving rise to Time and the dilation of time.

It is important for a full understanding to read books 1-3 and 7-8; but this includes a lot of the information from those books.

The building of dimensions has been extensively covered as has the net breakdown to give dimension.  This is shown in Figures a-c above which show: CT1 strings pulling ct2 along vs tearing ct2 apart as the universe expands.  During the contraction process this would be reversed, and it is worth mentioning again that at the quantum level there is a constant transition between expansion and contraction, but the net effect is towards the breakdown of higher states and expansions for the next 7 billion years or so.
          The movement in one direction (x) corresponds to the one dimension experienced by ct2.
          B shows the same process but where folding has provided for a second dimension (y) for ct3.
          Figure C shows where ct4 information arms are being loaded due to increased folding with ct3 states (from figure B) and a third dimension Z has been added.

          At the Ct3-4 level this reflects the stripping or building of ct3 states within the ct4 matrix.  This “movement” and “change” within the ct4 matrix is what we call time and is controlled as waves of information storage with charge at the underlying ct2 information arm level just as information is held in computers by charge and will be discussed as an effect in the next drawing but is extensively covered in the books referred to above.

The interaction of time, charge, gravity and dimension
In order to understand this you have to read the sections on charge and dimension, preferably books 1-3, but they will be covered here superficially.
Acceleration:
          As we accelerate, we slow the movement within the matrix and substitute movement along a single vector, gradually substituting ct3 and ct2 movement for ct1 movement which also reduces the dimensions as represented by the steady movement or tilt of the x and y axis towards the x axis.
          Looking at figure Ca, this is shown.  In a perfectly balanced ct3-ct4 state where all the exchanges towards or away from compression are balanced.
As we move towards net decompression, the Z axis begins to break down as shown in C2 and the ct states that make up that level of compression begin to move in the ct1 one dimension.  Ultimately as there is a breakdown of sufficient size, the atoms in question will actually begin to stretch out, lengthening along the line of x.
Ultimately there is a more complete breakdown as shown in C3 where all of the axis tend towards the breakdown axis of ct1 which is velocity in terms of ct1 breakdown or the release of space being the definition of acceleration just as the reduction of ct1 between two objects reflects their movement together.
          Imagine a group of photons being carried along a thick band of ct1 states extending towards the edge of the universe as they unravel.  They have no time but if you were in time you would see them moving at the speed of light as the ct1 states unravel.
          Now fold this group one time to create the second dimension (the first arose by folding the ct1.  Now in addition to pulling along the one line, they are pulling along another line in contrary way, an x and y axis and each half the size of the one pulling before (not exactly half).
          Repeat this process again for the next fold and you have ct3 waves folded into ct4.
          If you pull the ct4 along in the C1 balanced state, there is no tearing in the other 3 directions and time is maintained at a maximum value because there is no breakdown of time, the memory from one quantum instant to the next is perfect.  Note that we are moving at a minimum speed of 790,000 mph so we don’t come close to experiencing this type of historical preservation.
          Moreover, we have a very dispersed cloud of this ct3-ct4 time at the ct5 molecular level as many different ct3-ct4 transition states are carried along with ct4 neutrons towards greater compression which further complicates the time experience.   
          As you begin to accelerate, you tear apart the ct3-ct4 matrix and you create charge (change in the ct3 cloud) and time as we experience it, a fixed time would have no real experience.

          


The final piece of the puzzle is shown in the drawing below which shows how gravitational time dilation works in the folding process where compression and not decompression affect time.


Gravity is a 4th fold and as you pull in that direction of the4thdimension you also stop the movement in the other 3 or at least slow it way down and eventually you collapse it.
Just as the z axis had to bend towards the ct1-x axis as acceleration occurs, now the w axis, the black hole axis if you would, just after the neutron star has collapsed is the main direction of pull as opposed to the z ct4-ct3 axis.

          What happens in the ct4-ct5 transition is that the movement in the other 3 dimensions is replaced with movement along the 4th (w) dimension of ct5 (black holes).  As black holes are accelerated, this 4th dimension would start to move towards the z, then y, then x and time would begin to occur within the black hole as it broke down.
          In full compression, only movement in the 4th dimension (W) changes although the underlying states do continue to transition since the underlying symmetry of the universe does not break down in black holes and eventually black holes dissolve just like everything else into ct4 states.










No comments:

Post a Comment